REPSOURCE MASTER INDEX/Manufacturer Division/Product Search/Metal Fabricator
- MANUFACTURER DIVISION
Metal Fabricator
CONTACT:
Robert Angles
Organization: F.M.P. Inc.
Phone: (714) 434-9484
Fax: (714) 434-0272
Email:
bob@rdpaint.com
F.M.P. Inc has been established 12 years. We currently employ 8 full-time
craftsmen with expertise in all aspects of sheet metal fabrication,
including prototype development through production. Our capabilities include
CNC punching and forming, welding, deburring, assembly, and complete surface
finishing such as heat treating, anodizing, powder coat and painting,
passivate and chemical film. All parts are produced to customer
specifications and military standards.
Current industries served includes aerospace spare parts, and a wide variety
of commercial applications.
Reps.....!!
"F.M.P. Inc" may also be located in
General
Listings
Product: custom
Sheet Metal products
Industry:
commercial and
aerospace
industries,
Metal
Working
Geographic Location:
California,
Arizona
and
Nevada
Date of listing: September 23, 2005 (18)
Place your advertisement on RepSource
-
REPS.... YOU MAY ALSO BROWSE OPPORTUNITIES
VIA THE FOLLOWING 3 CATEGORIES
PRODUCT
INDUSTRY
GEOGRAPHIC LOCATION
-
IF you are a SALES REP or SALES AGENCY
searching for NEW PRODUCTS, sign up for your
Contact: Michael
Pierson
Organization: American Steel & Alum
Phone: 201-390-5119
Fax: 201-818-5271
URL:
www.novamerica.com
Email:
michaelpierson@rcn.com
We are a flat-rolled service center. We supply coils/sheets in High
Carbon steel along with low carbon and coated products.
Reps.....!! "American Steel &
Alum" may also be located in
General
Listings
Product:
coils/sheets in High Carbon steel along
with low carbon and coated products.
Metal
Industry:
Automotive,
Construction
and
Building.
Electrical and special
commodities
Geographic Location:
Ohio
(and surrounding areas)
RepSource SPEED - for reps seeking
"EMPLOYMENT":
Metals
Date of listing: August 5, 2005 (3m)
Place your advertisement on RepSource
-
REPS.... YOU MAY ALSO BROWSE OPPORTUNITIES
VIA THE FOLLOWING 3 CATEGORIES
PRODUCT
INDUSTRY
GEOGRAPHIC LOCATION
-
IF you are a SALES REP or SALES AGENCY
searching for NEW PRODUCTS, sign up for your
FREE MEMBERSHIP HERE
CONTACT: WYATT ISBELL
Organization: WAR-BROOKS CORPORATION
Phone: 901-948-9011
Fax: 901-948-9026
Email:
WYATT@WARBROOKS.COM
We are introducing a patented ATV tie down system. There is only one
competitor on the market. We can offer exclusive territories to the right
reps. The system allows ATV's to be locked down in minutes without the worry
of straps (loss, freezing up, breaking). We recently acquired this product
and want to get it out to independent dealers for this hunting season. We
are working on modifications to allow the product to be used for other
vehicles such as cars, snowmobiles, water bikes, etc. We also are a full
service job shop that welcomes new products or customers looking for good
service, shipping location, and pricing.
WAR-BROOKS CORPORATION
may also be
located in
RepSource as follows:
General
Listings
Product: ATV
Tie Down Systems, MISC STEEL
FABRICATIONS
Metal
Fabricator
Industry:
Hunting,
Sporting Goods, ATV (Recreational Vehicles, ATV),
FABRICATED
METAL
Geographic Location Required: NEED
REPS
IN ALL AREAS OF THE COUNTRY
Date of listing: July 25, 2005 (6m)
Place your advertisement on RepSource
-
REPS.... YOU MAY ALSO BROWSE ADVERTISEMENTS
VIA THE FOLLOWING 3 CATEGORIES
PRODUCT
INDUSTRY
GEOGRAPHIC LOCATION
CONTACT: VITO CASONI
Organization: THE
SERVICE MANUFACTURING GROUP, INC.
Phone: 716-633-6439
Fax: 716-633-5208
Email:
vcasoni@t-smg.com
Diverse family of contract manufacturing
services including:
-machining -small to large
-roll manufacturing including dynamic balancing
-enclosures
-weldments
-chassis build and assembly
-bus bar
-structural frames
-castings
-silkscreening
-silver plating
-printed circuit boards
-mig-tig-spot welding services
-paint services
-work in stainless, carbon, copper, brass, plastics
-ISO complaint
THE SERVICE MANUFACTURING
GROUP, INC. may also be found in
RepSource as follows:
General
Listings
Product:
contract manufacturer in sheet metal/Machining
Industry:
ALL
INDUSTRIES,
Metal
Working
Geographic Location:
(1)New
England States (2)Ohio-PA-New Jersey
(3)Mid-Atlantic
States
RepSource SPEED for reps seeking
"EMPLOYMENT":
Metals
Industry
Date of listing: May 3, 2005 (6m)
Place your advertisement on RepSource
-
REPS.... YOU MAY ALSO BROWSE OPPORTUNITIES
VIA THE FOLLOWING 3 CATEGORIES
PRODUCT
INDUSTRY
GEOGRAPHIC LOCATION
CONTACT: Lucien Tawil
Organization: EDC Inc.
Phone: 514-331-7510 (225)
Fax: 514-331-6393
URL: www.edc1.com
Email: lt@edc1.com
In business since 1949, EDC Inc. has developed a high expertise with Aluminum and Magnesium die casting. Our reputation is built on providing product soundness, dimensional repeatability and prompt delivery. We are intimately involved with all phases of a project, from initial design, through the supply of prototypes and tooling to final production and assembly. In light of our know-how, we recently won two NADCA awards (North American Die Casting Association) for a highly complex design and the quality of the parts produced. ISO 9001-2000 certified and QS9000 compliant, EDC is currently implementing TS 16949.
EDC Inc. is on the approved supplier list of many reputable customers in numerous industrial segments including, Telecom, Automotive, Industrial Hardware, Recreational and the Military. Our specialty is the production of high-end, porosity-free die casting parts using vacuum assisted technology, with thin walls, deep fins, together with an intricate design configuration. Our in-house capabilities include design, rapid prototyping, short production test runs as well as machining and surface treatment of die cast parts. Using a wide array of equipment, EDC Inc. has the flexibility to produce parts ranging from 1 ounce to 25 pounds.
This company also found in
General
Listings
Product:
Aluminum and Magnesium Die
Castings, Metal
Fabricator
Industry:
Electronics,
Lighting,
Recreational vehicles,
Metal Industry
Geographic Location:
East Coast,
Northwestern States,
Midwest States
Date of listing: August 19 2004 (12m13151)
Submit your company in the Manufacturer Division
-
REPS.... YOU MAY ALSO BROWSE OPPORTUNITIES
VIA THE FOLLOWING 3 CATEGORIES
PRODUCT
INDUSTRY
GEOGRAPHIC LOCATION
searching for NEW PRODUCTS, sign up for your
FREE MEMBERSHIP HERE
Contact: Brent Wortell
Organization:
Triton Industries inc
Phone: 773.384.3700 x11
Fax: 773.384.8748
URL:
http://www.tritonindustries.com
Email:
bwortell@tritonmail.com
ISO-QS 9000 certified, 100,000 sq ft LOW COST manufacturer. We own our
building,= zero occupancy cost. low cost skilled labor. modern automated
equipment. Sensored dies. Auto feed hardware insertion. Largest shipping
points are Tijuana, and Matamoras, Mexico because we are very COST
COMPETITIVE= cheap. Everyone needs parts BETTER FASTER CHEAPER, FORBES
MAGAZINE CALLS IT "THE CHEAP REVOLUTION". We know it, we're in it!
www.tritonindustries.com
Triton Industries Inc.
may also be found in:
General
Listings
Product:
-metal
stampings to 400
tons
-metal fabricating
-welding
= aluminum welding/ stainless welding
-automated hardware insertion
-boxes, chassis, enclosures, brackets, low , medium, high volumes.
-QS9000 / ISO certified 100,000 sq. ft. mfg space
- Low cost producer, zero- labor processes.
Industry:
electronic,
automotive, truck,
enclosure,
instrument,
electric,
appliance,
food service industry,
aerospace,
etc.
Geographic Location:
Openings
across the country
Date of listing: March 14, 2005 (6m)
Place your advertisement on RepSource
-
REPS.... YOU MAY ALSO BROWSE OPPORTUNITIES
VIA THE FOLLOWING 3 CATEGORIES
PRODUCT
INDUSTRY
GEOGRAPHIC LOCATION
Producer Number: 13185
Contact: MICHAEL K. LEIBEL
Organization: DESIGN ENGINEERING AND MANUFACTURING CO. INC.
Phone: 1-763-444-5563
Fax: 1-320-396-4263
Email: DEMCO@ECENET.COM
DESIGN ENGINEERING AND MANUFACTURING CO., INC. IS A FULL SERVICE METAL
FABRICATING, MACHINING AND ASSEMBLY JOB SHOP.
DESIGN ENGINEERING OFFERS BOTH PUNCH PRESS AND C.N.C. TURRET PRESS AS WELL AS
LASER CUTTING FOR AND METAL STAMPING NEEDS. TUBE BENDING OF BOTH ROUND AND
SQUARE TUBE.
NUMEROUS PRESS BRAKES FOR FORMING. WE OFFER ALL PHASES OF WELDING (STEEL,
STAINLESS STEEL AND ALUMINUM). CNC MILLING AND TURNING. DESIGN ENGINEERING ALSO
OFFERS ASSEMBLY AND PACKAGING. DESIGN ENGINEERING CAN ALSO FURNISH HEAT
TREATING, TUMBLING, ZINC FINISHING AND PAINTING AS PRODUCT REQUIRES.
DESIGN ENGINEERING AND MANUFACTURING CO. INC. has been in business for 17 years and is ISO-9000 certified
Reps.....!! "DESIGN ENGINEERING
AND MANUFACTURING CO. INC." may also be located in
General
Listings
Product:
WE ARE A METAL FABRICATING
JOB SHOP.
WE PRODUCE MANY PRODUCTS.
METAL FRAMES, BOXES AND ENCLOSURES.
TRANSMISSION AND DRIVE TRAIN COMPONENTS.
PRESSURE WASHER HOSE REELS AND ACCESSORIES.
Industry:
METAL:
WE PRODUCE PRODUCTS FOR A NUMBER OF INDUSTRIES.
FRAMES AND ACCESSORIES FOR THE PRESSURE WASHER INDUSTRY.
FRAMES AND ACCESSORIES FOR THE PORTABLE GENERATOR INDUSTRY.
AXLE, TRANSMISSION AND DRIVE TRAIN COMPONENTS FOR THE
OFF ROAD/ATV INDUSTRY. BOXES
AND ENCLOSURES FOR THE ELECTRICAL/INDUSTRIAL
BATTERY INDUSTRY. WE OFFER RAPID PROTO-TYPING FOR NEW PRODUCT DESIGNS.
Geographic Location:
MINNESOTA
Date of listing: October 28, 2004 (12m13185)
Submit your company in the Manufacturer Division
-
REPS.... YOU MAY ALSO BROWSE OPPORTUNITIES
VIA THE FOLLOWING 3 CATEGORIES
PRODUCT
INDUSTRY
GEOGRAPHIC LOCATION
-
IF you are a SALES REP or SALES AGENCY
searching for NEW PRODUCTS, sign up for your
FREE MEMBERSHIP HERE